1、壓力機的機身主要部位采用鋼板焊接分體式結構或鋼板焊接整體式機身結構，分體式結構中的頂座，中臺身，底座通過四根補強桿預緊而組成一體，具有高剛性臺身。
2、壓力機采用偏心齒輪，傳動穩定，噪音低
3、在采用了四角八面導路長導軌導向，側向力小，精度高。
4、壓力機的工作臺可選用固定式或向前開出，向后開出，左右開出和“T”型移動等多種形式，用戶可根據設備布置，單機或生產線等具體條件自行選定。移動臺車更換模具方便、迅速。
5、壓力機的模型可采用氣墊式固定行程或可調節行程，以滿足各種結構復雜，需拉伸零件的工藝需求。
6、壓力機的潤滑系統采用了自動循環系統，連續的定點、定量給油方式，具備管路堵塞、破裂、油量不足等故障檢測裝置。
7、壓力機的電氣控制系統采用可編程（PLC）控制系統，可是電子凸輪開頭、控制角監控與顯示、壓力監控噸位顯示等多種功能通過PLC來控制實現。T selling point
1.The main part of the fuselage of the press adopts welded steel split structure or steel plate welded integral boby structure,a top seat,a split structure in Taiwan,the base througr four reinforced rod preload and the composition of one,with high rigidity boby of tainwan.
2.Press the eccentric gear,stable transmission,low noise.
3.In the use of four homs and eight guide path length of guide rail,the lateral force is small,high precision.
4.Press can be fixed or forward out of open,backward,or departure and “T”type mobile and other forms,the user can according to the equipment layout,single machine or priduction line and other speciic conditions selected by the.Mobile trolley mould replacenment convenient,fast.
5.Die cushion of press can use air cushion type fixed stroke or adjustable stroke,to meet a variety of complex structure,the process needs to be drawing parts.
6.Lubncation system for press can press adopts automatic cycle,continuous fixed-point,quantitative oil feeding way,with pipeline blickage,rupture,the amouny of oil shortage of fault detection device.
7.The electrical control system of press machine adopts programmable(PLC)control system,but at the beginning,electronic cam brake angle moniting and display,pressure monitoring tonnage display a variety of function through PLC to control the realization of.
